Texas Roadhouse Steak Fries Recipe

In my kitchen, thick steak fries are a favorite partner for burgers and a good dipping sauce. I enjoy making this Texas Roadhouse-style version at home because the chunky potato pieces have a soft, fluffy middle and a crisp golden outside.

These are hearty fries, with more potato in each bite than a thin shoestring fry. The ingredient list stays simple: russet potatoes, vegetable oil, salt, pepper, and optional dried parsley. This is a home-style recipe, not a claim to the restaurant’s exact formula.

I like them with a turkey burger and blue cheese sauce, or with a spicy dip on the side. The method below uses two short frying stages so the center has time to become tender before the outside finishes crisping.

Why This Dish Is Great

  • Large russet potatoes give the fries the fluffy middle that makes a thick cut so satisfying.
  • A simple salt-and-pepper finish lets the potato flavor come through and works with many different sauces.
  • The first frying stage cooks the potato gently, while the second stage develops the crisp outer surface.
  • Leaving the clean skins on saves peeling and gives the edges a little extra texture.
  • The same fries can sit beside burgers, steak, or chicken, making them an easy match for a comfort-food meal.

What Are the Best Potatoes for Steak Fries?

Use large russet potatoes that feel firm and have sound skins. Their shape makes it easier to cut long, even fries. Avoid soft, badly sprouted, or green potatoes. Choose potatoes that are similar in size so the pieces can be divided into manageable batches without a few tiny strips cooking much faster than the rest.

Cut size is especially important here. Aim for pieces about 1/2 inch thick and roughly 3/4 inch wide. If you prefer wedges, keep their thickest part close to 1/2 inch. Very bulky wedges may look browned while their middle is still firm, so do not use color alone to decide when the first fry is finished.

Ingredients

  • 4 large russet potatoes
  • Vegetable oil, for frying
  • Salt, to taste
  • Black pepper, to taste
  • Dried parsley, for garnish (optional)

The oil quantity depends on the pot, so the original recipe lists vegetable oil for frying without a fixed volume. Use enough to submerge a small batch while keeping the pot no more than half full and leaving at least 2 inches of clear space above the oil. A deep pot gives much more room for bubbling than a shallow pan.

The original card lists two servings from four large potatoes. Those are very generous portions; the number of people it serves will depend on the size of the potatoes and the rest of the meal. Salt and pepper remain to taste, and the parsley garnish is optional.

Kitchen Equipment You Will Need

As an Amazon Associate I earn from qualifying purchases.

How To Make Texas Roadhouse Steak Fries

Allow about 20 minutes for washing, cutting, and drying, 55 minutes for heating the oil and frying roughly four small batches twice, plus a 10-minute cooling pause. That is about 85 minutes total. Extra batches, thicker pieces, or slower oil recovery need more time.

  1. Scrub the potatoes well, rinse, and dry. Leave the clean skins on if you like. Set a wire rack over a rimmed baking sheet for draining the cooked fries.
  2. Cut the potatoes into even steak-fry pieces about 1/2 inch thick and 3/4 inch wide. Rinse the cut pieces in cold water until the runoff is mostly clear, drain, and dry thoroughly with clean kitchen towels. There should be no visible surface water before frying.
  3. Put vegetable oil in a deep, heavy pot, no more than half full and with at least 2 inches of headroom above the oil. Attach a frying thermometer and heat to 325°F (165°C). Keep the work area dry, and use completely dry utensils around the hot oil.
  4. Use a dry metal spider to lower a small batch of potatoes gently into the oil. Do not crowd the pot or add enough potatoes to bring the oil close to the rim. Maintain about 325°F and never leave the pot unattended.
  5. Fry for about 6–8 minutes, or longer if needed, until the potatoes are pale and tender through the middle. Lift one out and check it with a fork away from the oil; the fork should enter easily. Do not move on to the final fry while the centers are still firm.
  6. Lift the potatoes out with the spider, let excess oil drain briefly over the pot, and spread them on the rack in one layer. Bring the oil back to 325°F and repeat with the remaining batches.
  7. After all the potatoes have had their first fry, leave them uncovered for 10 minutes so surface steam can escape. Keep them spread out. Increase the oil temperature to 350°F (175°C) for the final frying stage.
  8. Fry the potatoes again in small batches for about 2–4 minutes, until golden and crisp. Let the oil return to 350°F before each new batch. Lift the fries onto the rack and season immediately with salt and black pepper, away from the pot.
  9. Serve each finished batch promptly, or keep it spread on the rack in a 200°F oven only while the next batches finish. Avoid piling the fries in a deep bowl, where trapped steam softens the crust.
  10. Garnish with dried parsley if desired and serve hot with your chosen dipping sauce. Turn off the burner when frying is finished and let the oil cool completely before moving or disposing of it. Never add water to hot oil.

Notes

  • Cut the potatoes to a consistent thickness. A narrow end cooks more quickly, so group noticeably smaller pieces together if necessary.
  • Drying deserves time. Water left in a fold of potato skin can cause splattering even when the outside of most pieces looks dry.
  • Use the thermometer throughout frying. The oil temperature drops when potatoes go in, and a crowded batch takes longer to recover.
  • Let tenderness guide the first fry. The potatoes do not need to be golden yet; their soft center is the important cue.
  • Keep the first-fried potatoes uncovered during their brief cooling pause. A lid traps the steam you are trying to release.
  • Season after the final fry and away from the oil. Salt sticks to the warm surface without falling into the pot.
  • If the oil starts smoking, turn off the heat and let it cool before continuing. Keep water and wet utensils away, and never try to cool hot oil by adding water.
juicy steaks with Texas Roadhouse Steak Fries

Ingredients You Can Add

These are optional seasonings for the finished fries. Add them after frying so they flavor the potatoes without burning in the oil.

  • Garlic powder gives a familiar savory finish and mixes easily with the salt.
  • Smoked paprika adds gentle warmth and a little red color to the crust.
  • Cajun seasoning makes the fries spicier; check its salt content before adding more salt.
  • Finely grated Parmesan adds a salty, cheesy finish while the fries are still hot.
  • Fresh chopped parsley can give a brighter garnish than the optional dried parsley.
  • A small pinch of cayenne adds heat for anyone who likes a sharper kick.

What To Serve

I like steak fries as a hearty side for grilled burgers or juicy steaks. My Barefoot Contessa Turkey Burger is a favorite pairing, especially with a little blue cheese sauce on the burger.

For a spicy dip, try Zydeco Sauce in a small bowl alongside the fries. Keep the sauce separate until eating so the crisp edges stay dry instead of soaking up dressing on the plate.

Another dipping option is Freddy’s Jalapeño Fry Sauce. Fried chicken or barbecue ribs also makes a comforting main dish, and a crisp green salad gives the plate something fresh beside the potatoes.

Variations and Swaps

  • Keep the skins on for a rustic texture, or remove them with the knife before cutting if you prefer a smoother finish.
  • Cut broad, flat steak fries for an even shape that is easy to turn and check.
  • Choose wedges for a chunkier appearance, keeping their thickest section near the same 1/2-inch measurement.
  • Yukon Gold potatoes can be used, as noted in the original article, but their middle will taste creamier and less fluffy than russets.
  • For a milder plate, keep the salt and pepper finish simple and offer stronger seasonings at the table.
  • For a herb-forward version, use the parsley garnish and add chopped chives just before serving.
  • If you prefer to soak the cut potatoes in cold water for 30 minutes, add that time to the total and dry them thoroughly afterward. The main method uses a rinse instead.
  • Finish in small batches and serve them as they are ready when crispness matters most. This works especially well for a relaxed meal with sauces already on the table.

Storage

Refrigerate leftover cooked fries in shallow containers within 2 hours, or within 1 hour if the room is above 90°F. Keep the refrigerator at 40°F or colder and use them within 3–4 days. They will soften in storage, so they are best enjoyed soon after cooking when the contrast between the crust and center is strongest.

Reheat in a single layer on a baking sheet in a 400°F oven, turning once, until crisp and 165°F in the center; begin checking around 10 minutes. Freeze cooled leftovers in a single layer before packing if needed. Reheat frozen fries in the oven, allowing extra time, rather than dropping icy leftovers into hot oil.

FAQ

Why fry the potatoes twice?

The first stage gives thick potatoes time to become tender. The second stage removes more surface moisture and finishes the crust. This is helpful for steak fries because their thick center takes longer than a very thin fry.

Why are the fries dark but hard inside?

The oil may be too hot, the pieces may be too thick, or the first stage may have ended too soon. Check thickness and oil temperature, and make sure a lifted piece is tender before the final fry.

Do I have to soak the potatoes?

No. Rinsing the cut pieces and drying them thoroughly is the main method here. A 30-minute cold-water soak is an optional preparation choice, but it adds time and never replaces careful drying before hot oil.

Can I use an electric deep fryer?

Yes, follow your appliance’s instructions and minimum and maximum fill marks. Use small batches and the same tenderness and color cues. The stovetop half-full guidance does not override the appliance manufacturer’s oil limits.

Are these fries gluten-free?

The basic potatoes, plain vegetable oil, salt, pepper, and parsley do not introduce gluten ingredients. Check packaged seasonings and sauces, and use oil and equipment that have not been contaminated by breaded foods if gluten avoidance is important.

Can I bake them instead?

An oven method is possible, but it needs a different oil amount and cooking schedule. This ingredient list and recipe card describe deep-fried potatoes. Do not use the short frying times as oven baking times.

Short Description

These Texas Roadhouse-style steak fries use thick-cut russet potatoes, vegetable oil, salt, pepper, and optional parsley, with a gentle first fry and a final fry for crisp edges.

Texas Roadhouse Steak Fries Recipe

Recipe by Nancy
0.0 from 0 votes
Course: SidesCuisine: AmericanDifficulty: Easy
Servings

2

servings
Prep time

20

minutes
Cooking time

55

minutes
Total time

1

hour 

25

minutes

These Texas Roadhouse-style steak fries use thick-cut russet potatoes, vegetable oil, salt, pepper, and optional parsley, with a gentle first fry and a final fry for crisp edges.

Ingredients

  • 4 large russet potatoes

  • Vegetable oil, for frying

  • Salt, to taste

  • Black pepper, to taste

  • Dried parsley, for garnish (optional)

Directions

  • Scrub the potatoes well, rinse, and dry. Leave the clean skins on if you like. Set a wire rack over a rimmed baking sheet for draining the cooked fries.
  • Cut the potatoes into even steak-fry pieces about 1/2 inch thick and 3/4 inch wide. Rinse the cut pieces in cold water until the runoff is mostly clear, drain, and dry thoroughly with clean kitchen towels. There should be no visible surface water before frying.
  • Put vegetable oil in a deep, heavy pot, no more than half full and with at least 2 inches of headroom above the oil. Attach a frying thermometer and heat to 325°F (165°C). Keep the work area dry, and use completely dry utensils around the hot oil.
  • Use a dry metal spider to lower a small batch of potatoes gently into the oil. Do not crowd the pot or add enough potatoes to bring the oil close to the rim. Maintain about 325°F and never leave the pot unattended.
  • Fry for about 6–8 minutes, or longer if needed, until the potatoes are pale and tender through the middle. Lift one out and check it with a fork away from the oil; the fork should enter easily. Do not move on to the final fry while the centers are still firm.
  • Lift the potatoes out with the spider, let excess oil drain briefly over the pot, and spread them on the rack in one layer. Bring the oil back to 325°F and repeat with the remaining batches.
  • After all the potatoes have had their first fry, leave them uncovered for 10 minutes so surface steam can escape. Keep them spread out. Increase the oil temperature to 350°F (175°C) for the final frying stage.
  • Fry the potatoes again in small batches for about 2–4 minutes, until golden and crisp. Let the oil return to 350°F before each new batch. Lift the fries onto the rack and season immediately with salt and black pepper, away from the pot.
  • Serve each finished batch promptly, or keep it spread on the rack in a 200°F oven only while the next batches finish. Avoid piling the fries in a deep bowl, where trapped steam softens the crust.
  • Garnish with dried parsley if desired and serve hot with your chosen dipping sauce. Turn off the burner when frying is finished and let the oil cool completely before moving or disposing of it. Never add water to hot oil.

Notes

  • Use even 1/2-inch-thick potato pieces, dry thoroughly, and fry in small batches with a thermometer. First-fry until tender, cool for 10 minutes, then finish at 350°F. Total timing includes this cooling pause.

Similar Posts

Leave a Reply

Your email address will not be published. Required fields are marked *